Torso surmounted by collar...
Subscribe to:
Post Comments (Atom)
skip to main |
skip to sidebar
Followers
Blog Archive
-
▼
2008
(41)
-
▼
October
(41)
- Well that seemed to go well. Most people liked it,...
- And here it all is, ready to go.Gloves are sewn on...
- First wearing. Ok the first obvious problem is tha...
- At this point I decided to go completely overboard...
- The inside of the head is padded out with some cut...
- Time for some painting then, since after a looong ...
- And this is the result after sewing (yes sewing!) ...
- The aha moment was discovering hat-brim wire. It's...
- In the meantime I'd been been giving quite a lot o...
- And this is the antenna rod all glued together and...
- The ball at the top of the antenna was easily made...
- Bender has a little plinth-thingy at the top of hi...
- Back to the head, and particularly the rod on top ...
- And papier mache that too. By now I was getting pr...
- Next job is to put some rings of corrugated cardbo...
- I used the paper template to trace out the shape o...
- By now the torso was pretty much done, but missing...
- While all this was going on every couple of days t...
- Papier mache over that, and then glue another laye...
- Now we're talking! It actually starts to look like...
- I made 3 circular plates to go inside the head tem...
- Head V2 would be made from corrugated cardboard, w...
- Ok by now I was well hacked off with the mess the ...
- Finally papier mache over the lot.
- Roll this up and insert two balloons, partly infla...
- So time to start on the eyes - what I like to call...
- ...And torso surmounted by head. Already it's appa...
- Torso surmounted by collar...
- And here it is again, with tape over the joints to...
- Ok so I finally learned my lesson about that thin ...
- Then coat the head with papier mache, this time us...
- Time for the head - simple construction idea reall...
- And then it was time for the first layer of papier...
- Here I've surmounted the collar with a cardboard r...
- And here is the collar with the curved surface tap...
- So here's the collar with all the buttress pieces ...
- First step was the creation of the bevelled part o...
- Raw materials - some leftover boxes from the local...
- So how do I create Bender the robot for Halloween ...
- So what costume? Death maybe? Not new. Something f...
- I help marshal a number of public street skates ar...
-
▼
October
(41)
No comments:
Post a Comment